Doepfer A-160-2 Clock Divider II

()

Frequency Divider

For clock/trigger/gate signals
Width: 4 TE/ 4 HP / 20 mm

30-Day Money-Back Guarantee

3-Year Thomann Warranty

Available since June 2015
Item number 364116
Sales Unit 1 piece(s)
Width 4 TE / HP

Show variations of this product

Doepfer A-160-2 Clock Divider II

Doepfer A-160-2 Clock Divider II Frequency Divider * For clock/trigger/gate signals * Width: 4 TE/ 4 HP / 20 mm...

€99

to the product

Doepfer A-138M

Doepfer A-138M Matrix Mixer * With 4 rows and 4 columns * Unipolar / Bipolar mode switchable on each column * Suitable f...

€149

to the product

125

Doepfer A-180-2 Multiples

Doepfer A-180-2 Multiples Passive Multi-Port Distributor * 8x Interconnected jacks * Sockets are divided into 2x quadrup...

€35

to the product

Doepfer A-138s Mini Stereo Mixer

Doepfer A-138s Mini Stereo Mixer Mini Stereo Mixer * 4-in-2 mix module in Eurorack format * Four inputs with attenuator ...

€79

to the product

155

Doepfer A-124 Wasp Filter SE

Doepfer A-124 Wasp Filter SE Wasp Filter * Special edition * Special 12 dB multimode filter * Circuit technology of the ...

€88

to the product

Doepfer A-156

Doepfer A-156 Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous inp...

€119

to the product

Doepfer A-180-3 Dual Buffered Multiple

Doepfer A-180-3 Dual Buffered Multiple Synthesizer module * Double buffered 1-in-3 multiple * For buffering and duplicat...

€49

to the product

Doepfer A-198 (Module + Manual)

Doepfer A-198 (Module + Manual) Trautonium Controller * Consists of Doepfer A-198 Module and Ribbon Controller * Ribbon ...

€219

to the product

Doepfer A-110-6

Doepfer A-110-6 Eurorack Module * Trapezoid Thru Zero Quadrature VCO * Uses quadrature trapezoid as the fundamental wave...

€249

to the product

Doepfer A-183-2 Offset Generator

Doepfer A-183-2 Offset Generator Offset Generator / Attenuator / Polariser * Width: 4 HP / 20.0 mm * Depth: 20 mm * Powe...

€51

to the product

Doepfer A-199 Spring Reverb Module

Doepfer A-199 Spring Reverb Module Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of ...

€119

to the product

€99

All prices incl. VAT

Sales Rank

in Clock-, Trigger-Modules

Information on the disposal of old devices

This is what customers who viewed this product bought

Doepfer A-160-2 Clock Divider II VE

Doepfer A-160-5 VC Clock Multiplier

€105

68 Customer ratings

5 55 Customers 4 13 Customers 3 0 Customers 2 0 Customers 1 0 Customers

4.8 / 5

handling

features

quality

Review guidelines

41 Reviews

Wonderfully useful

Anonymous 01.02.2017

I've been building up my modular system & studio for about a year, and many of the parts (Moog Mother-32, Arturia Minibrute & Microbrute) feature sequencers that can be clocked to each other, which is great.

However this module allows me to use them at different rates while remaining synchronised which has opened up a whole world of experimentation.

The outputs can be used to sync other units, to set the tempo of tapped LFOs on modules such as Mutable Instruments Peaks and the Disting Mk 3.

I like the usual Doepfer high build quality and the fact that you can switch between the three modes; a straight clock divider with 7 divided outputs (half speed, quarter speed and so on), as a set of prime numbers to create poly rhythmic beats and a set of sequenced outputs.

Each output has it's own LED so you can see at a glance what is happening - it's a very slim unit so might not be suited to the edge of a case as this could hinder access to the sockets.

Like all the other Doepfer modules I have purchased from Thomann it comes well packaged and came with two screws and a connecting lead for the bus board.

Highly recommended if linking sequencers is your thing!

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Function over form

Emily Banks 29.05.2020

This is one of the only clock dividers that can turn gate signals into triggers. I use it to trigger accents at set intervals that are divided from my main clock without having to use up triggers from more exotic modules like Euclidian Circles.

Functionality wise this module is a real lifesaver. Very versatile.

That being said, the jacks are easily the worst I've ever used on any product. They are crooked and skewed so that inserting a cable at a normal angle feels like you're going to break the entire module. You have to insert patch cables from a sideways angle to get them in there, and even then they wobble like hell.

I've had good experiences with Doepfer before so I'm hoping I was just unlucky to receive a poorly assembled module. You might have more luck.

Despite the jacks being loose and crooked, the module has never malfunctioned because of it.

Report

Clock Heaven

Stephen662 23.07.2015

I got this new Deeper clock divider to add to my arsenal of clock dividers and multipliers - you can never have enough clocks! This is a really sweet addition for anyone who wants to add complexity to their clock system in the euro-rack, since not only does it produce the 'standard' 2,4,8,16 divisions it also goes up to 32, 64 and 128. But if that wasn't enough, it offers prime number divisions, which can make for crazy off beat timings at 2, 3, 5, 7, 11 and 13.... not enough? Then it also does a straight count from 2 all the way up to 8.

The module is switchable to produce triggers or gate outputs too. All this in a tiny 4hp of rack space. Build quality is to the usual high standard offered by Dopfer; nice switches and smooth sockets. I have this sat next to a 4ms rotating clock divider and they compliment each other wonderfully. All in all a brilliant module for a great price. Doepfer rocks around the clock again!

Report

Does what it it supposed to

1 BPM 22.05.2021

At first I was a bit confused about the interpretation of "multiplier" and "divider", depending from what perspective. I mean, mathematically to divide means to make less and to multiply means to make more. But here it is the other way around ;-) Anyway, this module does not need a user manual, is straightforward to use as all explanation is printed on the device itself. Works like a charm. When patching to another hole, it first finishes off the current cycle, which for me is very neat.

Report

Read all reviews

Doepfer A-160-2 Clock Divider II

Frequency Divider

This is what customers who viewed this product bought

68 Customer ratings

You have to be logged in to rate products.

41 Reviews

Smart Navigator

Served with love!

Doepfer A-160-2 Clock Divider II

Frequency Divider

This is what customers who viewed this product bought

Accessories & matching items

68 Customer ratings

You have to be logged in to rate products.

41 Reviews

Compare options

Smart Navigator